BendTech Engineers has developed special purpose model in Three Roller Pipe Bending Machine. In General Practice Three Roller Pipe Bending Machine has only bottom two rollers are in driven condition and above roller is only sliding up & down as per requirement.But in this model we have all the three rollers are in driven condition, so that it can produce more torque while bending and u don’t need to push the section while bending.It has speciality to make continuous rings from the Round Pipe, Flats, and Angles.
Its Specially Designed & Developed Machine By Our R&D Team.
Features & Strength of The Machine
- Double screws provided for extra support which provides more life to machine.
- It can bend continuous rings from the pipe and make diameter as per your size
Example:- From 12.5mm pipe it can make ring of 4.5” diameter ( As shown in Below image)
- For its continuous operation Leads to save your scrape while bending.
Example:- If you are bending a continuous coil of 7” Diameter from 19mm OD Pipe, then your material wastage(Ends of the ring which u have to cut) will be around 80-100mm only. So from 6000mm pipe u have only 100mm wastage.
- Fast Production.
- Finest And Small & Robust Gearing Designed.
- Maintenance Free Machine.
- Easy to Move in work area.
- Also provide scale to make perfect Arc & Circles from the Sections.
|2||Pipe Size||Up to 25mm||Up to 50mm||Up to 75mm|
|3||Pipe Thickness||1 to 2 mm||1 to 3 mm||1 to 3 mm|
|4||Electrical Motor||2 Hp||3 Hp||5 Hp|
|5||Gear Box||Yes ( Standard Make)||Yes ( Standard Make)||Yes ( Standard Make)|
|6||Bend Direction||Clockwise & Anticlockwise||Clockwise & Anticlockwise||Clockwise & Anticlockwise|
|7||Forward Reverse Operation||By Switch Operation||By Switch Operation||By Switch Operation|
|8||Side Guide Rollers For Pipe Support||Yes||Yes||Yes|
|9||All Three Rollers Are in Drive|
|10||Double Screw For Extra Support||Yes||yes||Yes|